| Peer-Reviewed

Stabilization of Clayey Soils Using Chloride Components

Received: 2 June 2017     Accepted: 5 July 2017     Published: 29 November 2017
Views:       Downloads:
Abstract

Soils exhibit generally undesirable engineering properties. Soil Stabilization is the alteration of soils to enhance their physical properties. Stabilization can increase the shear strength of a soil and/or control the shrink-swell properties of a soil, thus improving the load bearing capacity of a sub-grade to support pavements and foundations. Stabilization and its effect on soil indicate the reaction mechanism with additives, effect on its strength, improve and maintain soil moisture content and suggestion for construction systems. The main objective of this paper is to improve the physical and chemical properties of clay soil by using chemical additives like chloride compounds as NaCl, CaCl2 and MgCl2. Various proportions of NaCl, CaCl2 and MgCl2 was mixed with soil and basic engineering properties such as specific gravity, liquid limit, compaction characteristics and consolidation parameters were determined. It has been observed that an addition of different percentages like 4%, 8% and 12% of chloride compounds into clayey soils increased the dry density and decreased the moisture content. The liquid limit, plastic limit and plasticity index decreased with the increase in chemical content. This appears due to the fact that addition of NaCl, CaCl2 and MgCl2 filled up the voids between particles of soil as particle size of NaCl, CaCl2 and MgCl2 is smaller than soil particles and can be easily replaced the voids. The compression index and swelling index was decreased with the increase in chloride compound percentage.

Published in American Journal of Civil Engineering (Volume 5, Issue 6)
DOI 10.11648/j.ajce.20170506.18
Page(s) 365-370
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2017. Published by Science Publishing Group

Keywords

Soil Stabilization, Clay Soil, Grain Size Distribution, Atterberg Limits, Standard Proctor Test, Consolidation

References
[1] Perloff. W. H. (1976), "Soil Mechanics, Principals and Application", New York: John Wily, & Sons.
[2] Janathan Q. Addo, Sanders, T. G. & Chenard, M. (2004), Road dust suppression: "Effect on unpaved Road Stabilization".
[3] Chen, F. H. (1981), "Foundation on Expansive soil", Amsterdam: Elsevier Scientific Publishing Company.
[4] White, D. (2005). Fly Ash Soil Stabilization for Non-Uniform Subgrade Soils. IHRB Project TR-461, FHWA Project 4.
[5] FM5-410, (2012). Soil Stabilization for Road and Airfield. www.itc.nl/~rossiter/Docs/FM5-410.
[6] Hicks, R. (2002). Alaska Soil Stabilization Design Guide.
[7] Frydman, I. R. & Ehrenreich, T. (1977). Stabilization of heavy clay with potassium chloride. Journal of Geotechnical Engineering, 8, 95-107.
[8] Wood, K. B. (1971). Highway Engineering Hand Book. Chapter 21. New York: McGraw Hill Book Company, Inc.
[9] Lambe, T. W. (1958). The structure of compacted clay. Journal of Soil Mechanics and Foundation. 84, 55-70.
[10] Venkatabor Rad, G. (1977). Physico-chemical mechanism governing the plasticity behaviors of soils. Journal of Indian Geotechnical. 7, 261-282.
[11] Das, B. M. (1998), Principle of Foundation Engineering, Books/cole publishing company, CA-93950, USA.
Cite This Article
  • APA Style

    Habiba Afrin. (2017). Stabilization of Clayey Soils Using Chloride Components. American Journal of Civil Engineering, 5(6), 365-370. https://doi.org/10.11648/j.ajce.20170506.18

    Copy | Download

    ACS Style

    Habiba Afrin. Stabilization of Clayey Soils Using Chloride Components. Am. J. Civ. Eng. 2017, 5(6), 365-370. doi: 10.11648/j.ajce.20170506.18

    Copy | Download

    AMA Style

    Habiba Afrin. Stabilization of Clayey Soils Using Chloride Components. Am J Civ Eng. 2017;5(6):365-370. doi: 10.11648/j.ajce.20170506.18

    Copy | Download

  • @article{10.11648/j.ajce.20170506.18,
      author = {Habiba Afrin},
      title = {Stabilization of Clayey Soils Using Chloride Components},
      journal = {American Journal of Civil Engineering},
      volume = {5},
      number = {6},
      pages = {365-370},
      doi = {10.11648/j.ajce.20170506.18},
      url = {https://doi.org/10.11648/j.ajce.20170506.18},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajce.20170506.18},
      abstract = {Soils exhibit generally undesirable engineering properties. Soil Stabilization is the alteration of soils to enhance their physical properties. Stabilization can increase the shear strength of a soil and/or control the shrink-swell properties of a soil, thus improving the load bearing capacity of a sub-grade to support pavements and foundations. Stabilization and its effect on soil indicate the reaction mechanism with additives, effect on its strength, improve and maintain soil moisture content and suggestion for construction systems. The main objective of this paper is to improve the physical and chemical properties of clay soil by using chemical additives like chloride compounds as NaCl, CaCl2 and MgCl2. Various proportions of NaCl, CaCl2 and MgCl2 was mixed with soil and basic engineering properties such as specific gravity, liquid limit, compaction characteristics and consolidation parameters were determined. It has been observed that an addition of different percentages like 4%, 8% and 12% of chloride compounds into clayey soils increased the dry density and decreased the moisture content. The liquid limit, plastic limit and plasticity index decreased with the increase in chemical content. This appears due to the fact that addition of NaCl, CaCl2 and MgCl2 filled up the voids between particles of soil as particle size of NaCl, CaCl2 and MgCl2 is smaller than soil particles and can be easily replaced the voids. The compression index and swelling index was decreased with the increase in chloride compound percentage.},
     year = {2017}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Stabilization of Clayey Soils Using Chloride Components
    AU  - Habiba Afrin
    Y1  - 2017/11/29
    PY  - 2017
    N1  - https://doi.org/10.11648/j.ajce.20170506.18
    DO  - 10.11648/j.ajce.20170506.18
    T2  - American Journal of Civil Engineering
    JF  - American Journal of Civil Engineering
    JO  - American Journal of Civil Engineering
    SP  - 365
    EP  - 370
    PB  - Science Publishing Group
    SN  - 2330-8737
    UR  - https://doi.org/10.11648/j.ajce.20170506.18
    AB  - Soils exhibit generally undesirable engineering properties. Soil Stabilization is the alteration of soils to enhance their physical properties. Stabilization can increase the shear strength of a soil and/or control the shrink-swell properties of a soil, thus improving the load bearing capacity of a sub-grade to support pavements and foundations. Stabilization and its effect on soil indicate the reaction mechanism with additives, effect on its strength, improve and maintain soil moisture content and suggestion for construction systems. The main objective of this paper is to improve the physical and chemical properties of clay soil by using chemical additives like chloride compounds as NaCl, CaCl2 and MgCl2. Various proportions of NaCl, CaCl2 and MgCl2 was mixed with soil and basic engineering properties such as specific gravity, liquid limit, compaction characteristics and consolidation parameters were determined. It has been observed that an addition of different percentages like 4%, 8% and 12% of chloride compounds into clayey soils increased the dry density and decreased the moisture content. The liquid limit, plastic limit and plasticity index decreased with the increase in chemical content. This appears due to the fact that addition of NaCl, CaCl2 and MgCl2 filled up the voids between particles of soil as particle size of NaCl, CaCl2 and MgCl2 is smaller than soil particles and can be easily replaced the voids. The compression index and swelling index was decreased with the increase in chloride compound percentage.
    VL  - 5
    IS  - 6
    ER  - 

    Copy | Download

Author Information
  • Civil Engineering Department, Rajshahi University of Engineering and Technology, Rajshahi, Bangladesh

  • Sections