| Peer-Reviewed

Influence of Steel Fibers on the Behavior of Light Weight Concrete Made from Crushed Clay Bricks

Received: 15 July 2014     Accepted: 26 July 2014     Published: 10 August 2014
Views:       Downloads:
Abstract

The purpose of this study is to investigate the effects of steel fibers on some properties of light weight concrete. The coarse aggregate used in this study made from crushed clay bricks. Four proportions of steel fibers are used (0.25%, 0.5%, 0.75%, and 1%) by volume of concrete, in addition, to reference mix (without steel fibers). The density obtained from experimental work was 1812 Kg/m³. The results showed that, in general, the adding of steel fibers led to increase the compressive strength of light weight concrete. The enhancement in compressive strength was about (17%-43%) at 7 days and (21%-51%) at 28 days as compared with reference mix. Also, it is deduced that, the proportion (0.75%) of steel fibers is the optimum one. On the other hand, splitting tensile strength increased by about 62.62%, 33.76%, 17.27% and 5.93% for light weight concrete with 1%, 0.75%, 0.5% and 0.25% steel fibers by volume of concrete respectively. Furthermore, flexural strength improved by about 54.24%, 41.67%, 29.25% and 20.91% for light weight concrete with 1%, 0.75%, 0.5% and 0.25% steel fiber by volume of concrete respectively. Finally, the results indicated that, there are significant increases in static modulus of elasticity and absorption for mixes which have steel fibers as compared with others without steel fibers.

Published in American Journal of Civil Engineering (Volume 2, Issue 4)
DOI 10.11648/j.ajce.20140204.11
Page(s) 109-116
Creative Commons

This is an Open Access article, distributed under the terms of the Creative Commons Attribution 4.0 International License (http://creativecommons.org/licenses/by/4.0/), which permits unrestricted use, distribution and reproduction in any medium or format, provided the original work is properly cited.

Copyright

Copyright © The Author(s), 2014. Published by Science Publishing Group

Keywords

Steel Fibers, Light Weight Concrete, Crushed Clay Bricks, Compressive Strength, Modulus of Elasticity, Absorption

References
[1] ACI committee 211, “Standard practice for selecting proportions for structural lightweight concrete” (ACI 211.2-98) (Reapproved 2004), ACI manual of concrete practice, pp. 1-20.
[2] Topcu IB. “Semi-lightweight concretes produced by volcanic slags”. Cem Concr Res 1997; 27:15–21.
[3] Bilodeau A, Kodur VKR, Hoff GC. “Optimization of the type and amount of polypropylene fibers for preventing the spalling of lightweight concrete subjected to hydrocarbon fire”. Cem Concr Compos 2004; 26(2):163–74.
[4] Al-Jabri KS, Hago AW, Al-Nuaimi AS, Al-Saidy AH. “Concrete blocks for thermal insulation in hot climate”. Cem Concr Res 2005;35:1472–9.
[5] Uysal H, Demirboga R, Remzi S, Gul R. “The effects of different cement dosages, slumps, and pumice aggregate ratios on the thermal conductivity and density of concrete”. Cem Concr Res 2004;34:845–8.
[6] Hwang CL, Hung MF. “Durability design and performance of self-consolidating lightweight concrete”. Constr Build Mater 2005;19:619–26.
[7] NRMCA, CIP 36, “Concrete in Practice, Structural Light Weight Concrete”, National Ready Mixed Concrete Association, 2003, P.P. 1-2.
[8] Mohd, R.S. ,"Lightweight Concrete" ,M.SC. in Civil. Eng. University of technology Malaysia ,1997. P. 1.
[9] Hjh, KM., Mohamad, S.F., and Norpadzlihatum, M., "Study of Lightweight Concrete”. http://www.4shared.com
[10] Balaguru, P. & Foden, A. 1996. “Properties of Fiber Reinforced Structural Lightweight Concrete”. ACI Structural Journal, 93 (1): 62-78.
[11] Swamy, R.N. & Jojagha, A.H. 1982. “Impact Resistance of Steel Fibre Reinforced Lightweight Concrete”. International Journal of Cement Composites and Lightweight Concrete, 4 (4): 209-220.
[12] Higashiyama, H. & Banthia, N. 2008. “Correlating Flexural and Shear Toughness of Lightweight Fiber-Reinforced Concrete”. ACI Materials Journal, 105 (3): 251-257.
[13] Libre N. A., Shekarchi M., Mahoutian, & Soroushian P., “Mechanical properties of hybrid fiber reinforced lightweight aggregate concrete made with natural pumice”, Construction and Building Materials Journal, 25(2011): 2458-2464.
[14] ASTM C 150-02a; “Standard Specification for Portland Cement”, Annual Book of ASTM Standards, Vol. 04. 02, 2002.
[15] ASTM C 33 – 01. “Standard Specification for Concrete Aggregates”. “Annual book of ASTM standards, 2001, pp. 1-8.
[16] ASTM C 330-04, “Standard specification for lightweight aggregate for structural concrete “Annual book of ASTM standards, pp. 1-4.
[17] ASTM C192-88 “Standard Practice for Making and Curing Test Specimens in the Laboratory”. Animal Book of ASTM Standard, Philadelphia, Vol.04-02, 1989, pp. 112-118.
[18] B.S. 1881, part 116, "Method of Determination of Compressive Strength of Concrete Cubes", British Standards Institution, 1989.
[19] ASTM C496-86 “Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens”, Annual Book of ASTM Standard, Philadelphia, Vol. 04-02, 1989, pp. 259-262.
[20] ASTM C78-84 “Standard Test Method for Flexural Strength of Using Simple Beam with Third-Point Loading”, Annual Book of ASTM Standard, Philadelphia, Vol. 04-02, 1989, pp.32-34.
[21] ASTM C469, "Standard Test Method for Static Modulus of Elasticity and Poisson’s Ratio of Concrete in Compression", Vol. 4, 2002, pp.1-5.
[22] ASTM C642-06,” Standard Test Method for Density, Absorption, and Voids in Hardened Concrete”, Annual book of ASTM Standard, pp.1-3.
[23] Salih, S. A., Rejeb, S. K., and Najem, K. B. “The Effect of Steel Fibers on the Mechanical Properties of high Performance Concrete” 2005 Al-Rafidain Engineering Vol.13 No.4.
[24] Dawood ET, M. “Proportioning of crushed brick concrete reinforced by palm fibre”. Journal of Materials Sciences and Engineering with Advanced Technology. 2010; 2(1):77-96.
[25] Dawood ET, Ramli M. “Study the effect of using palm fiber on the properties of high strength flowable mortar”, CI Premier: 34th OWICs papers, Singapore. 2009; 93-101.
Cite This Article
  • APA Style

    Othman Hameed Zinkaah. (2014). Influence of Steel Fibers on the Behavior of Light Weight Concrete Made from Crushed Clay Bricks. American Journal of Civil Engineering, 2(4), 109-116. https://doi.org/10.11648/j.ajce.20140204.11

    Copy | Download

    ACS Style

    Othman Hameed Zinkaah. Influence of Steel Fibers on the Behavior of Light Weight Concrete Made from Crushed Clay Bricks. Am. J. Civ. Eng. 2014, 2(4), 109-116. doi: 10.11648/j.ajce.20140204.11

    Copy | Download

    AMA Style

    Othman Hameed Zinkaah. Influence of Steel Fibers on the Behavior of Light Weight Concrete Made from Crushed Clay Bricks. Am J Civ Eng. 2014;2(4):109-116. doi: 10.11648/j.ajce.20140204.11

    Copy | Download

  • @article{10.11648/j.ajce.20140204.11,
      author = {Othman Hameed Zinkaah},
      title = {Influence of Steel Fibers on the Behavior of Light Weight Concrete Made from Crushed Clay Bricks},
      journal = {American Journal of Civil Engineering},
      volume = {2},
      number = {4},
      pages = {109-116},
      doi = {10.11648/j.ajce.20140204.11},
      url = {https://doi.org/10.11648/j.ajce.20140204.11},
      eprint = {https://article.sciencepublishinggroup.com/pdf/10.11648.j.ajce.20140204.11},
      abstract = {The purpose of this study is to investigate the effects of steel fibers on some properties of light weight concrete. The coarse aggregate used in this study made from crushed clay bricks. Four proportions of steel fibers are used (0.25%, 0.5%, 0.75%, and 1%) by volume of concrete, in addition, to reference mix (without steel fibers). The density obtained from experimental work was 1812 Kg/m³. The results showed that, in general, the adding of steel fibers led to increase the compressive strength of light weight concrete. The enhancement in compressive strength was about (17%-43%) at 7 days and (21%-51%) at 28 days as compared with reference mix. Also, it is deduced that, the proportion (0.75%) of steel fibers is the optimum one. On the other hand, splitting tensile strength increased by about 62.62%, 33.76%, 17.27% and 5.93% for light weight concrete with 1%, 0.75%, 0.5% and 0.25% steel fibers by volume of concrete respectively. Furthermore, flexural strength improved by about 54.24%, 41.67%, 29.25% and 20.91% for light weight concrete with 1%, 0.75%, 0.5% and 0.25% steel fiber by volume of concrete respectively. Finally, the results indicated that, there are significant increases in static modulus of elasticity and absorption for mixes which have steel fibers as compared with others without steel fibers.},
     year = {2014}
    }
    

    Copy | Download

  • TY  - JOUR
    T1  - Influence of Steel Fibers on the Behavior of Light Weight Concrete Made from Crushed Clay Bricks
    AU  - Othman Hameed Zinkaah
    Y1  - 2014/08/10
    PY  - 2014
    N1  - https://doi.org/10.11648/j.ajce.20140204.11
    DO  - 10.11648/j.ajce.20140204.11
    T2  - American Journal of Civil Engineering
    JF  - American Journal of Civil Engineering
    JO  - American Journal of Civil Engineering
    SP  - 109
    EP  - 116
    PB  - Science Publishing Group
    SN  - 2330-8737
    UR  - https://doi.org/10.11648/j.ajce.20140204.11
    AB  - The purpose of this study is to investigate the effects of steel fibers on some properties of light weight concrete. The coarse aggregate used in this study made from crushed clay bricks. Four proportions of steel fibers are used (0.25%, 0.5%, 0.75%, and 1%) by volume of concrete, in addition, to reference mix (without steel fibers). The density obtained from experimental work was 1812 Kg/m³. The results showed that, in general, the adding of steel fibers led to increase the compressive strength of light weight concrete. The enhancement in compressive strength was about (17%-43%) at 7 days and (21%-51%) at 28 days as compared with reference mix. Also, it is deduced that, the proportion (0.75%) of steel fibers is the optimum one. On the other hand, splitting tensile strength increased by about 62.62%, 33.76%, 17.27% and 5.93% for light weight concrete with 1%, 0.75%, 0.5% and 0.25% steel fibers by volume of concrete respectively. Furthermore, flexural strength improved by about 54.24%, 41.67%, 29.25% and 20.91% for light weight concrete with 1%, 0.75%, 0.5% and 0.25% steel fiber by volume of concrete respectively. Finally, the results indicated that, there are significant increases in static modulus of elasticity and absorption for mixes which have steel fibers as compared with others without steel fibers.
    VL  - 2
    IS  - 4
    ER  - 

    Copy | Download

Author Information
  • Department of civil Engineering, College of Engineering, Almuthana University, Hilla, Iraq

  • Sections